Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Dishwasher F6E7 Code Flow Meter

Plain-language guidance for Kenmore code F6E7 (6-7) on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F6E7 (6-7) for Kenmore Dishwasher — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F6E7 (6-7)
Appliance Dishwasher
Quick answer

Kenmore dishwasher code F6E7 (6-7): flow meter disconnected, damaged or failed, with the manual wiring checks.

Model compatibility

Kenmore reuses codes across series and model years, so F6E7 (6-7) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F6E7 means a disconnected or damaged flow meter (flow meter failure on MicroClean HE).

Seeing F6E7 or 6-7? The dishwasher is reporting a problem with its flow meter. The wording depends on the series, so the steps below are split that way.

  • Kenmore HE and Elite HE (F-code on a digital display; other models flash the Clean light): a disconnected or damaged meter. Switch the power off and inspect the wiring reaching it. Only if that wiring is intact does the meter get swapped.
  • Kenmore MicroClean HE: the entry says flowmeter failure. Pull the plug, then trace two wiring runs: salt sensor (water softener) to the meter, and that same sensor to the control board. Broken wires are repaired, loose ones reconnected. Good connections lead to a new meter.

Nearby codes worth a look

  • F6E8: softener valve trouble
  • F6E6: water entering too cold
  • F7E1: element that never heats

Kenmore dishwasher service areas

Need Kenmore dishwasher repair in the Miami, New York, Houston, Los Angeles or San Diego metro areas? Ring (844) 747-3641. Have the model number and the code ready, plus a note of any checks you made. Details: Kenmore dishwasher service.

Source: Kenmore MicroClean HE dishwasher error codes; Kenmore HE dishwasher error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Dishwasher Repair

Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Kenmore dishwasher back to spotless cycles.

View service
AE C1 C2 C3 C4 C5

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.