Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Dishwasher F9E1 Code Long Drain or Diverter

Plain-language guidance for Kenmore code F9E1 (9-1) on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F9E1 (9-1) for Kenmore Dishwasher — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F9E1 (9-1)
Appliance Dishwasher
Quick answer

Kenmore dishwasher code F9E1 (9-1) means a long drain on 665-prefix models and a diverter disc position fault on the HE series.

Model compatibility

Kenmore reuses codes across series and model years, so F9E1 (9-1) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F9E1 means a long drain (665-prefix models) or that the control board cannot detect the diverter disc position.

Model number begins 665

F9E1 means a long drain: water is slow to leave the machine. Run through these owner checks.

  • Clean the filter.
  • Inspect the drain hose, plus the knockout plug of the disposer and the air gap.
  • Cycle the power, leaving it off for 30 seconds.

HE, Elite HE, Global HE or MicroClean HE

Here the control board has lost track of the diverter disc, the piece that steers water to the lower or the upper spray arm. After unplugging, inspect the wiring to the diverter motor; reconnect loose wires and replace a harness that is damaged. If the wiring holds up, that motor is replaced because it sends no position signal. Units lacking a digital display blink the Clean light.

Codes to compare

  • F9E2: diverter motor that will not stop
  • F9E3: absent diverter disc
  • F8E1: water leaving slowly

Service for your Kenmore dishwasher

To arrange Kenmore dishwasher service in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 747-3641. Bring up the code, the model number and the steps already taken. See dishwasher repair for more.

Source: Kenmore Global HE dishwasher error codes; Kenmore MicroClean HE dishwasher error codes; Kenmore HE dishwasher error codes; Dishwasher error codes product help

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Dishwasher Repair

Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Kenmore dishwasher back to spotless cycles.

View service
AE C1 C2 C3 C4 C5

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.