Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Dishwasher F1E2 Code Control Board Memory

Plain-language guidance for Kenmore code F1E2 (1-2) on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F1E2 (1-2) for Kenmore Dishwasher — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F1E2 (1-2)
Appliance Dishwasher
Quick answer

Short guide to Kenmore dishwasher F1E2: what it means and the reset the manual gives.

Model compatibility

Kenmore reuses codes across series and model years, so F1E2 (1-2) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Damaged or corrupted control board memory, or incompatible software in the microprocessor.

F1E2 in brief

  • You see: F1E2 on a digital display, or 1-2 as a Clean light flash pattern on models without one.
  • Kenmore HE, Elite HE and Global HE: memory on the control board is damaged or corrupted, or the microprocessor has incompatible software.
  • Kenmore MicroClean HE: the electronic control board is defective.

Reset, then decide

  1. Cut the dishwasher’s power for 5 minutes.
  2. Restore power and watch the display.
  3. If F1E2 shows again, the manual calls for a new electronic control board, which a technician installs.

Nearby codes worth comparing

  • F1E1: listed as a possible control module cause.
  • F2E1: a stuck button or console fault.
  • F2E2: the control panel cannot talk to the board.

Kenmore dishwasher repair across our service area

We take Kenmore dishwasher repair calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas. Dial (844) 747-3641 and give the code (F1E2), the model number and what you have tried so far.

Source: Sears PartsDirect – Kenmore HE dishwasher error codes; Sears PartsDirect – Kenmore Global HE dishwasher error codes; Sears PartsDirect – Kenmore MicroClean HE dishwasher error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Dishwasher Repair

Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Kenmore dishwasher back to spotless cycles.

View service
AE C1 C2 C3 C4 C5

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.