Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Dishwasher F5E1 Code Door Not Closed in Time

Plain-language guidance for Kenmore code F5E1 (5-1) on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F5E1 (5-1) for Kenmore Dishwasher — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F5E1 (5-1)
Appliance Dishwasher
Quick answer

Kenmore F5E1 in short form: door timing, switch failure and the latch assembly.

Model compatibility

Kenmore reuses codes across series and model years, so F5E1 (5-1) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Door switch failure: door not closed within 4 seconds of Start/Resume, or latch broken.

Why F5E1 appears

  • The door was not closed within 4 seconds after Start/Resume was pressed.
  • Or the door latch assembly is broken.

Covered: Kenmore HE, Kenmore Global HE and Kenmore MicroClean HE dishwashers.

What you can do

  1. Press Start/Resume, then close the door inside 4 seconds.
  2. Cycle will not start and the code remains? The door switch may be defective; arrange service.

Technician sequence

  1. Unplug the dishwasher and open up the door.
  2. Check the door switch wire harness; reconnect loose wires or replace a damaged harness.
  3. Harness okay: replace the door latch assembly.

Connected codes

  • F5E2: door not seen opening between cycles.
  • F6E1: the dishwasher will not fill.

Dishwasher repair help near you

From the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 747-3641 about your Kenmore. Have the model number, the code F5E1 and your list of tried fixes at hand. Start at dishwasher repair if you want more detail.

Source: Sears PartsDirect – Kenmore HE dishwasher error codes; Sears PartsDirect – Kenmore Global HE dishwasher error codes; Sears PartsDirect – Kenmore MicroClean HE dishwasher error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Dishwasher Repair

Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Kenmore dishwasher back to spotless cycles.

View service
AE C1 C2 C3 C4 C5

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.