A plain-language snapshot of F017 for Kenmore Range — confirm the model series before you act.
Written by
Daniel Reeves Appliance Repair Content SpecialistPublished October 20, 2026
Content statusVerified
Error codeF017
ApplianceRange
Quick answer
Kenmore code F017 means the interface board cannot configure the touch panel. Reset, harness check and wrong-part notes.
Model compatibility
Kenmore reuses codes across series and model years, so F017 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What thiscode means
User interface board is unable to configure the touch panel.
What F017 tells you
The board that runs the display cannot set up the touch panel. The code is listed for 790-series freestanding Kenmore ranges and Elite electric slide-in models 790.4131, 790.4255 and 790.5256.
Sequence the manual follows
It starts with a power reset: disconnect power, wait 30 seconds, restore. If the error returns, power comes off again and the harness between touch panel and user interface control board is checked, with loose wires reconnected and a damaged harness replaced.
After a recent part replacement, a wrong part may be the cause, so the part number is compared with your model number. With no recent replacement and good connections, the board is replaced first; if the fault continues, the touch panel follows. Slide-in ranges use the names oven user interface control board and touch control panel.
The harness, board and panel work is for a technician.
Compare with
F019 (board cannot configure the relay control board) is the relay-side partner of this code. F012 (mismatch) and F015 (touch panel failure) are close relatives.
Service for your Kenmore range
Our service center takes calls for Kenmore ranges in the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 747-3641. Read more about range repair. Please give the code, the model number and the steps already tried.
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Get started
Seeing this code onyour Kenmore appliance?
Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.
Burner not igniting, oven not heating, or an error code on the display? We diagnose Kenmore gas and electric range faults and restore reliable cooking.
