Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Range F14 Code Control Board and Touch Panel Link

Plain-language guidance for Kenmore code F14 on Range — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F14 for Kenmore Range — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F14
Appliance Range
Quick answer

Meaning of F14 on Kenmore slide-in and glass touch ranges, with the order of checks the manual gives.

Model compatibility

Kenmore reuses codes across series and model years, so F14 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F14 is a lost link between the touch panel and the oven control board on Kenmore ranges.

What the display is telling you

Either the control board cannot hear the touch panel, or the panel has come loose from the board. The oven may not respond to key presses until this is sorted out.

Check in this order

Elite slide-in ranges (790.4671 electric; gas or dual-fuel 790.3263, 790.3264, 790.4260, 790.4261, 790.4275, 790.4276)

  1. Disconnect electrical power.
  2. Inspect the connections between the touch control panel and the oven control board and reconnect any loose wires.
  3. If everything is tight, the manual replaces the oven control board.
  4. On the electric 790.4671, a fault that persists then calls for the touch control panel.

Glass touch electric range

  1. Unplug the range.
  2. Inspect the harness connection between glass touch panel and electronic oven control board.
  3. A connection that is fine means a new glass touch panel; if F14 reappears afterwards, the electronic oven control board.

Compare with

F11 (stuck key or touch panel fault), F12 (control board microprocessor) and F15 (control board failure).

Kenmore range service in our metro areas

Technicians cover the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 747-3641 or read about range repair first. Note the code, model number and any wire you reseated.

Source: PartsDirect – Kenmore Elite slide-in electric range 3-digit error codes; PartsDirect – Kenmore Elite 790 slide-in gas and dual-fuel range error codes; PartsDirect – Kenmore glass touch electric range error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.