Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Dishwasher F6E1 Code No Water Entering

Plain-language guidance for Kenmore code F6E1 (6-1) on Dishwasher — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F6E1 (6-1) for Kenmore Dishwasher — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F6E1 (6-1)
Appliance Dishwasher
Quick answer

Kenmore F6E1 laid out step by step: float, supply line, inlet valve and board.

Model compatibility

Kenmore reuses codes across series and model years, so F6E1 (6-1) may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Dishwasher will not fill: the control does not detect water entering the tub.

How to read F6E1

The control sees no water coming into the tub. Digital display models show the code. Others flash the Clean light for the function (6), pause, then the problem (1), and repeat; the console stays disabled while it flashes.

Checks from the manual

  1. Remove anything wedged under the overfill float; a float stuck up blocks filling.
  2. Unplug the dishwasher and shut off the water supply valve.
  3. Detach the supply line from the water inlet valve and inspect the valve screen. A clogged screen means a new valve, since debris can lodge in the valve and keep it stuck open.
  4. Screen clear: hold the line end over a shallow pan and open the supply valve briefly. If nothing flows, call a plumber for the supply.
  5. Water flows: examine the inlet valve wiring, reconnect loose wires or replace a damaged harness.
  6. Wiring fine: the water inlet valve or the electronic control board may need replacing.

Sibling codes

  • F6E2: water inlet valve failure.
  • F6E3: suds or air in the pump.
  • F6E4: float switch open.

Request dishwasher service

Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can reach us at (844) 747-3641. Mention the F6E1 display, your model number and the checks already done; the dishwasher repair page has more.

Source: Sears PartsDirect – Kenmore HE dishwasher error codes; Sears PartsDirect – Kenmore Global HE dishwasher error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Dishwasher Repair

Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Kenmore dishwasher back to spotless cycles.

View service
AE C1 C2 C3 C4 C5

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.