Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Range F30 Code Oven Temperature Sensor Circuit

Plain-language guidance for Kenmore code F30 Oven temperature sensor on Range — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F30 Oven temperature sensor for Kenmore Range — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F30 Oven temperature sensor
Appliance Range
Quick answer

F30 on a Kenmore range points to the oven temperature sensor circuit on 790 electric, glass touch, Elite slide-in gas or dual-fuel and 2014 models.

Model compatibility

Kenmore reuses codes across series and model years, so F30 Oven temperature sensor may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Oven temperature sensor circuit open or sensor failure, depending on the series.

F30 by series

Kenmore range F30 means
790-prefix self-cleaning electric, 2004 and newer Sensor circuit open
Freestanding electric with glass touch panel control Sensor failure
Elite slide-in gas or dual-fuel: 790.4276, 790.4275, 790.4261, 790.4260, 790.3264, 790.3263 Sensor failure
Self-cleaning electric, 2014 models Sensor probe circuit open

What the manuals describe

  • 790 electric range: probe resistance is read at room temperature against a chart, and the harness from the electronic oven control board to the probe connector gets inspected.
  • Glass touch and Elite slide-in ranges: with the range unplugged, resistance is measured across the sensor circuit starting at the electronic oven control board.

All of that is technician work, so the owner’s part is to unplug the range and call.

Other sensor codes

  • F31: shorted sensor circuit
  • F3E0: oven temperature sensor failure
  • F3/E0: open sensor circuit

Kenmore range repair, metro coverage

Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 747-3641. Quote F30, give the model number and share what you checked. See range repair.

Source: Sears PartsDirect – Kenmore 2004 and newer self-cleaning electric range; Sears PartsDirect – Kenmore glass touch electric range; Sears PartsDirect – Kenmore 2014 self-cleaning electric range; Sears PartsDirect – Kenmore Elite slide-in gas and dual-fuel range

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
References

Sources & references

Supporting manuals and references used for this error-code guide.

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.