Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Range Code F3E0 Oven Temperature Sensor Failure

Plain-language guidance for Kenmore code F3E0 on Range — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F3E0 for Kenmore Range — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F3E0
Appliance Range
Quick answer

A quick reference for F3E0 on Kenmore 664-series slide-in electric ranges: the meaning, the sensor check and when to call.

Model compatibility

Kenmore reuses codes across series and model years, so F3E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

F3E0 is an oven temperature sensor failure.

Quick facts

  • Code: F3E0
  • Meaning: oven temperature sensor failure
  • Range: Kenmore slide-in electric, model numbers beginning with 664

Steps in the manufacturer chart

  1. Cut power to the range, either by pulling the plug or by turning off its house circuit breakers.
  2. Test the oven temperature sensor with a meter. At 77 degrees F, a good sensor shows 1,000 to 1,200 ohms.
  3. Any reading outside those limits means the sensor gets replaced.

The meter test is what a technician checks. Owners can safely handle step 1 and then call.

Codes that look similar

If the display differs slightly, compare F31 (sensor circuit shorted), F30 (sensor circuit open) and F3/E0 (defective sensor or open sensor circuit).

Kenmore range repair across our metro areas

Service for Kenmore ranges is available in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 747-3641 or read about range repair, and keep the model number, the F3E0 code and anything you have tried within reach.

Source: Kenmore 664 model electric slide-in range error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.