Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Wall Oven F2/E0 Code Keypad Harness Disconnected

Plain-language guidance for Kenmore code F2/E0 on Wall Oven — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F2/E0 for Kenmore Wall Oven — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F2/E0
Appliance Wall Oven
Quick answer

What F2/E0 shows on a Kenmore 665 wall oven and the listed steps: reseat the keypad harness, press CANCEL, then keypad or control.

Model compatibility

Kenmore reuses codes across series and model years, so F2/E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Keypad wire harness is disconnected.

F2/E0 at a glance

Display: F2/E0. Meaning: the keypad wire harness is disconnected. Applies to: Kenmore 665 model wall ovens that show F-code/E-code pairs.

Steps listed for this code

  • Cut power to the wall oven or pull the plug.
  • If the keypad wire harness has come loose, plug it back in.
  • Switch power back on, then press CANCEL.
  • Wait and watch the display. Should F2/E0 come back within 60 seconds, a new keypad is called for; a persisting fault after that points to the electronic oven control.

Similar codes

If the display reads F2/E5 or F2/E6 instead, the CANCEL key is reported defective. A defective oven control is covered under F1.

Get wall oven repair near you

The line at (844) 747-3641 takes calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas. When you reach out about Kenmore oven repair, mention F2/E0, the model number and whether the harness was reseated.

Source: Kenmore 665 model wall oven error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Oven Repair

Oven not heating, uneven baking, or showing an error? We diagnose Kenmore wall oven faults with a safety-first approach.

View service
F0 F1 F2/E5 F2/E6 F3 F3/E0

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.