Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Wall Oven F3/E0 Code Open Sensor Circuit

Plain-language guidance for Kenmore code F3/E0 on Wall Oven — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F3/E0 for Kenmore Wall Oven — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F3/E0
Appliance Wall Oven
Quick answer

F3/E0 on a Kenmore 665 wall oven: sensor defective or circuit open. Short summary and order of work.

Model compatibility

Kenmore reuses codes across series and model years, so F3/E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Defective oven temperature sensor or open oven temperature sensor circuit.

F3/E0: the short version

Oven temperature sensor defective, or its circuit open. Kenmore 665 model wall ovens display this as an F-code/E-code pair.

Order of work

  • Power off or unplug the oven first.
  • A loose sensor wire harness connection gets reseated, and a damaged harness gets replaced.
  • Next, a technician reads sensor resistance on a volt/ohm meter against 1080 ohms at 70 degrees F room temperature and replaces the sensor if it differs.
  • Good sensor and good connections? The electronic oven control is replaced.

Related

For the same sensor with a shorted circuit see F3/E1. The plain F3 code is the general sensor failure, and F3/E2 is the Bake mode over-temperature code.

Repair for Kenmore ovens across our metro areas

Dial (844) 747-3641 if you are in the Miami, New York, Houston, Los Angeles or San Diego metro areas and need wall oven repair. Share F3/E0, your model number and the steps you have done.

Source: Kenmore 665 model wall oven error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Oven Repair

Oven not heating, uneven baking, or showing an error? We diagnose Kenmore wall oven faults with a safety-first approach.

View service
F0 F1 F2/E0 F2/E5 F2/E6 F3

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.