Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Wall Oven F3/E2 Code Over 575 F in Bake

Plain-language guidance for Kenmore code F3/E2 on Wall Oven — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F3/E2 for Kenmore Wall Oven — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F3/E2
Appliance Wall Oven
Quick answer

F3/E2 on a Kenmore 665 wall oven is a Bake mode reading above 575 degrees F. Procedure and related codes.

Model compatibility

Kenmore reuses codes across series and model years, so F3/E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Oven temperature is more than 575 F in Bake mode.

Meaning of F3/E2

Bake mode temperature has passed 575 degrees F. The code is listed for Kenmore 665 model wall ovens.

What to expect from the procedure

  • Power comes off, or the oven is unplugged.
  • A sensor wire that is loose is pushed back into place; a damaged harness is replaced.
  • A technician tests the sensor with a volt/ohm meter. Anything other than 1080 ohms at room temperature (70 degrees F) means a new sensor.
  • If the sensor and connections are fine, the electronic oven control is replaced.

Other temperature codes

Check F3/E0 for a defective sensor or open circuit, and F3/E3 for the higher Clean mode limit.

Repair help in our service area

People in the Miami, New York, Houston, Los Angeles and San Diego metro areas can ring (844) 747-3641 to arrange wall oven repair. Quote F3/E2 and the model number when you call.

Source: Kenmore 665 model wall oven error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Oven Repair

Oven not heating, uneven baking, or showing an error? We diagnose Kenmore wall oven faults with a safety-first approach.

View service
F0 F1 F2/E0 F2/E5 F2/E6 F3

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.