Skip to content
Same-day and next-day appointments in most areas.
Call (844) 747-3641
Kenmore appliance service
Error Code

Kenmore Wall Oven F3/E3 Code Over 950 F in Clean

Plain-language guidance for Kenmore code F3/E3 on Wall Oven — symptoms, safe checks, and when to call a technician.

Book a Repair (844) 747-3641
  • Upfront Estimates
  • Approval Before Repair
  • Expert Technicians
  • Workmanship Warranty

At a glance

Error code overview

A plain-language snapshot of F3/E3 for Kenmore Wall Oven — confirm the model series before you act.

Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Content status Verified

Error code F3/E3
Appliance Wall Oven
Quick answer

F3/E3 on a Kenmore 665 wall oven: Clean mode reading above 950 degrees F. Short procedure and similar codes.

Model compatibility

Kenmore reuses codes across series and model years, so F3/E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Oven temperature is more than 950 F in Clean mode.

Kenmore 665 model wall oven, display F3/E3: the oven temperature is more than 950 degrees F in CLEAN mode.

Procedure at a glance

  1. Switch off power at the oven, or pull its plug.
  2. Seat the sensor wire if it has worked loose; swap a damaged wire harness.
  3. A technician then reads the sensor with a volt/ohm meter and replaces it unless it measures 1080 ohms at 70 degrees F.
  4. Sensor and connections fine: the electronic oven control is replaced.

Easily confused with

F3/E2 reports the Bake mode limit instead. F3/E1 reports a shorted sensor circuit, and F3 is the general sensor failure code.

Kenmore wall oven repair by phone

Our team at (844) 747-3641 is reachable from the Miami, New York, Houston, Los Angeles and San Diego metro areas. For oven repair mention F3/E3, the model number and your earlier steps.

Source: Kenmore 665 model wall oven error codes

Caution

Safety warning

Important safety warning

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Get started

Seeing this code on your Kenmore appliance?

Book a specialist Kenmore service visit for a clear estimate and approval before any repair. Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 747-3641
Fix it right

Recommended repair service

Oven Repair

Oven not heating, uneven baking, or showing an error? We diagnose Kenmore wall oven faults with a safety-first approach.

View service
F0 F1 F2/E0 F2/E5 F2/E6 F3

Get started

Ready to restore your Kenmore appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 747-3641

Book a repair

Tell us about your Kenmore we’ll take it from there

Share your model and symptom and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

(844) 747-3641
Phone (844) 747-3641
Email info@kenmoreservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.